|
|
Products
- 1.00 x Stopper, rubber cover. (VA4240-G)
Cap for bleed screw,
Complies
Protects the bleed screw from dirt and impurities,
Mounts in place of your old part,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,
=================================
Ref. Renault Equivalent (s):
- 06 03 936 600,
- 0603936600,
- 77 01 348 673,
- 7701348673,
Quantity in stock:990 |
0.49€
Incl. 20 % TAX
 In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Cap screw purge for Renault R4 4L and Renault Estafette","ecProductId":7876,"ecProductSku":"VA4240-3","ecProductPrice":0.49,"ecProductState":"in storage","ecProductCategory":"Rear wheel cylinders","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":211} Shipping costs from 3.99 € for France
|
|
|
|
|
Single base gasket,
Fits any Renault R4 4L sedan or F4 or F6 van equipped with this carburetor.
================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:176 |
1.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Carburettor base gasket Zenith 28IF from Renault R4 4L.","ecProductId":7689,"ecProductSku":"VA12101-28IF3","ecProductPrice":1.9,"ecProductState":"in storage","ecProductCategory":"Fuel Pump Wedge and Block Closure for Renault R4 4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":212} Shipping costs from 3.99 € for France
|
|
|
|
|
Pin to the unit,
For front axle,
Left or right wheel,
For any Renault Estafette from 1969 to end,
==========================
Ref. Renault Equivalent (s):
- 10 89 060 700,
- 1089060700,
Quantity in stock:77 |
0.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Cardan pin for Renault Estafette from 1969 to end. At the unit.","ecProductId":7732,"ecProductSku":"VA4210-26","ecProductPrice":0.9,"ecProductState":"in storage","ecProductCategory":"Screws & front axle add on parts","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":213} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Cotter Pin. Din94. (VAGOUP-00007)
Pin to the unit,
For front axle,
Left or right wheel,
For any Renault Estafette from until 1968,
==========================
Ref. Renault Equivalent (s):
- 10 89 030 400,
- 1089030400,
Quantity in stock:747 |
0.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Cardan pin for Renault Estafette until 1968. At the unit.","ecProductId":7733,"ecProductSku":"VA4210-G","ecProductPrice":0.9,"ecProductState":"in storage","ecProductCategory":"Screws & front axle add on parts","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":214} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Bronze ring. Box tail centering. (VABAG-00001)
Centering ring at the flywheel.
To be checked when changing the clutch.
Ring with sides.
For any Renault Estafette equipped.
============================
Ref. Renault Equivalent (s):
- 77 00 553 174,
- 7700553174,
Quantity in stock:90 |
6.99€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Centering ring pinion tail box for Renault Estafette.","ecProductId":636,"ecProductSku":"VA1440-2","ecProductPrice":6.99,"ecProductState":"in storage","ecProductCategory":"Ring centering axle of gearbox in the flywheel","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":215} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Bronze ring. Box tail centering. (VABAG-00001)
Centering ring at the flywheel.
To be checked when changing the clutch.
Ring with sides.
For any Renault R4 4L sedan or F4 or F6 van equipped.
============================
Ref. Renault Equivalent (s):
- 77 00 553 174,
- 7700553174,
Quantity in stock:90 |
6.99€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Centering ring pinion tail box for Renault R4 4L.","ecProductId":637,"ecProductSku":"VA20011-BAGUE","ecProductPrice":6.99,"ecProductState":"in storage","ecProductCategory":"Gearbox Tail Centering Ring for 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":216} Shipping costs from 3.99 € for France
|
|
|
|
|
New product,
Clip that tightens the choke cable sheath,
For 28IF carburettor equipped with this assembly only,
For Cléon or Billancourt engine,
For any Renault R4 4L sedan or F4 or F6 van equipped with this assembly,
============================
Ref. Renault Equivalent(s):
- ...
Quantity in stock:827 |
2.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Choke Cable Fixing Clip on 28IF Carburettor Arm. For Renault R4 4L.","ecProductId":8611,"ecProductSku":"VA12101-CLIP","ecProductPrice":2.9,"ecProductState":"in storage","ecProductCategory":"Mixing Screw, Needle, Jet individually for Renault R4 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":217} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 9.00 x Sheet metal edge seal, roof tower ring, chrome (Linear meter) (FAR_9_0001)
Chromed roof tower ring,
Molding,
Clips onto the sheet metal return all around the roof,
For any Renault Estafette short low or raised,
==============================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:20 |
35.10€
33.35€
Save 5% Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Chrome bead of the sun canopy. Chrome. Estafette short base or elevated","ecProductId":748,"ecProductSku":"VA9994-25","ecProductPrice":33.35,"ecProductState":"in storage","ecProductCategory":"Roof rushes","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":218} Shipping costs from 3.99 € for France
|
|
|
|
|
Additional halogen high beam headlight,
Chrome.
Diam. : 152 x 81mm,
With black plastic grille,
Delivered with a 55 W H3 bulb.
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,
======================
Ref. Renault Equivalent(s):
- ...
Quantity in stock:8 |
61.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Chromed Additional Halogen Headlight with Grille for Renault R4 4L or Renault Estafette. H3 12V 55W bulb included. To the Unit.","ecProductId":9750,"ecProductSku":"VA80101-LPE","ecProductPrice":61.9,"ecProductState":"in storage","ecProductCategory":"Raid rally lighting for 4L and Renault 4.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":219} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Rear bumper for Renault R4 4L Sedan. Chromed. For 4L since 1968. (VA55101-1C)
- 2.00 x Bumper guard for Renault 4, R4, 4L F4 F6. Front left or rear right. (VA55011-2)
- 2.00 x Bumper guard for Renault 4, R4, 4L F4 F6. Front right or rear left. (VA55011-11)
- 1.00 x Front bumper for Renault R4 4L. Chromed. For 4L since 1968. (VA55011-1C)
- 1.00 x Kit of brackets, bumper mounting for Renault R4 4L. For front bumper. Steel. For 4L since 1968. (VA55011-30N)
- 1.00 x Kit of brackets, bumper mounting for Renault R4 4L. For rear bumper. Steel. For 4L since 1968. (VA55101-20N)
Chromed bumper kit,
Front and back,
Includes bumpers and fitting,
For any Renault R4 4L sedan equipped with these bumpers, since 1968.
===============================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:1 |
370.20€
333.18€
Save 10% Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Chromed bumper kit for Renault R4 4L. Front and rear bumpers, 4 bumpers, fittings. 4L since 1968.","ecProductId":1533,"ecProductSku":"VA55011-KC","ecProductPrice":333.18,"ecProductState":"in storage","ecProductCategory":"Chromed bumpers kits","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":220} Shipping by carrier, rate calculated automatically by the site.
|
|
|
|
|
Products
- 2.30 x Chrome key, windshield seal, rear window ... "T" shaped. (Linear meter) (FAR_9_0005)
Chromed molding for tailgate window seal,
"T" shaped profile,
Average quality,
For tailgate window,
For any Renault R4 4L sedan or F4 van,
===============================
Ref. Renault Equivalent (s):
- 77 01 348 551,
- 7701348551,
Quantity in stock:26 |
20.47€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Chromed molding for rear window rubber seal for Renault R4 4L.","ecProductId":734,"ecProductSku":"VA9994-11","ecProductPrice":20.47,"ecProductState":"in storage","ecProductCategory":"Rear window","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":221} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 3.10 x Chrome key, windshield seal, rear window ... "T" shaped. (Linear meter) (FAR_9_0005)
Chromed molding for windscreen seal,
"T" shaped profile,
Average quality,
For windscreen,
For any Renault R4 4L sedan or F4 van,
===============================
Ref. Renault Equivalent (s):
- 77 01 348 551,
- 7701348551,
Quantity in stock:19 |
27.59€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Chromed molding for windscreen seal for Renault R4 4L.","ecProductId":738,"ecProductSku":"VA9994-15","ecProductPrice":27.59,"ecProductState":"in storage","ecProductCategory":"Windscreen","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":222} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Internal circlip. (VACIR-00002)
New circlip,
To lock the position of the gearbox cover lever,
For HA0/354 gearbox,
For any Renault R4 4L sedan or F4 or F6 van equipped with the HA0/354 gearbox,
============================
Ref. Renault Equivalent(s):
- 77 03 066 023,
- 7703066023,
Quantity in stock:247 |
0.30€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 06.06.2025
{"ecProductName":"Circlip Maintains Gear Lever Gearbox Cover Renault R4 4L. Gearbox HA0\/354.","ecProductId":9741,"ecProductSku":"VA21601-11","ecProductPrice":0.3,"ecProductState":"in storage","ecProductCategory":"Gearbox Output Lever and Lever Parts for Renault R4 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":223} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Kevlar Clutch Disc Lining 214 x 120 x 3.1 mm. Individually. Undrilled Disc. (FAR_D021401100031KEV)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:10 |
155.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citro\u00ebn 11CV Front Wheel Drive - 2 Sides, Linings 214 x 120 x 3.1 - Kevlar Quality - Clutch Disc Lining Service.","ecProductId":9771,"ecProductSku":"FAR_GAR_PGST00009","ecProductPrice":155.8,"ecProductState":"in storage","ecProductCategory":"11CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":224} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 214 x 120 x 3.1. Individually. Undrilled Disc. (FAR_D021401200031STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:27 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citro\u00ebn 11CV Front Wheel Drive - 2 Sides, Linings 214 x 120 x 3.1 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9770,"ecProductSku":"FAR_GAR_PGST00008","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"11CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":225} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 214 x 120 x 3.5. Individually. Undrilled Disc. (FAR_D021401200035STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:5 |
75.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen 11CV Front Wheel Drive - 2 Sides, Linings 214 x 120 x 3.5 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9801,"ecProductSku":"FAR_GAR_PGST00032","ecProductPrice":75.8,"ecProductState":"in storage","ecProductCategory":"11CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":226} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
- 13.00 x 35 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5VRT)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
92.90€
Incl. 20 % TAX
 Oups, Rupture
No current supply on this product currently
{"ecProductName":"Citroen 11CV Front Wheel Drive - 4 Front or Rear Jaws - Green Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9778,"ecProductSku":"FAR_GAR_PGST00016","ecProductPrice":92.9,"ecProductState":"not in storage","ecProductCategory":"11CV Front Wheel Drive.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":227} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 13.00 x 35 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
56.50€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen 11CV Front Wheel Drive - 4 Front or Rear Jaws - Standard Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9775,"ecProductSku":"FAR_GAR_PGST00013","ecProductPrice":56.5,"ecProductState":"in storage","ecProductCategory":"11CV Front Wheel Drive.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":228} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 181 x 124 x 3.2. Individually. Undrilled Disc. (FAR_D018101240032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Notify availabilityQuantity in stock:0 |
77.80€
Incl. 20 % TAX
Oups, Rupture
No current supply on this product currently
{"ecProductName":"Citro\u00ebn 15CV Front Wheel Drive - 2 Sides, Linings 181 x 124 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9772,"ecProductSku":"FAR_GAR_PGST00010","ecProductPrice":77.8,"ecProductState":"not in storage","ecProductCategory":"15CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":229} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Kevlar Clutch Disc Lining 215 x 145 x 3.2 mm. Individually. Undrilled Disc. (FAR_D021501450032KEV)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:7 |
155.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citro\u00ebn 15CV Front Wheel Drive - 2 Sides, Linings 215 x 145 x 3.2 - Kevlar Quality - Clutch Disc Lining Service.","ecProductId":9774,"ecProductSku":"FAR_GAR_PGST00012","ecProductPrice":155.8,"ecProductState":"in storage","ecProductCategory":"15CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":230} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 215 x 145 x 3.2. Individually. Undrilled Disc. (FAR_D021501450032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
75.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citro\u00ebn 15CV Front Wheel Drive - 2 Sides, Linings 215 x 145 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9773,"ecProductSku":"FAR_GAR_PGST00011","ecProductPrice":75.8,"ecProductState":"in storage","ecProductCategory":"15CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":231} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 13.00 x 45 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:1 |
95.50€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen 15CV Front Wheel Drive - 4 Front or Rear Jaws - Green Quality - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9805,"ecProductSku":"FAR_GAR_PGST00034","ecProductPrice":95.5,"ecProductState":"in storage","ecProductCategory":"15CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":232} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 13.00 x 45 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:4 |
62.74€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen 15CV Front Wheel Drive - 4 Front or Rear Jaws - Standard Quality - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9804,"ecProductSku":"FAR_GAR_PGST00033","ecProductPrice":62.74,"ecProductState":"in storage","ecProductCategory":"15CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":233} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 187 x 120 x 3.5. Individually. Undrilled Disc. (FAR_D018701200035STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:5 |
121.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen 7 & 9CV Front Wheel Drive - 2 Sides, Linings 187 x 120 x 3.5 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9799,"ecProductSku":"FAR_GAR_PGST00031","ecProductPrice":121.8,"ecProductState":"in storage","ecProductCategory":"7 & 9CV Front Wheel Drive","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":234} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
- 11.00 x 35 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5VRT)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
86.30€
Incl. 20 % TAX
Oups, Rupture
No current supply on this product currently
{"ecProductName":"Citroen 7 & 9CV Front Wheel Drive - 4 Front or Rear Jaws - Green Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9777,"ecProductSku":"FAR_GAR_PGST00015","ecProductPrice":86.3,"ecProductState":"not in storage","ecProductCategory":"7 & 9CV Front Wheel Drive.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":235} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 35 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:7 |
55.50€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen 7 & 9CV Front Wheel Drive - 4 Front or Rear Jaws - Standard Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9776,"ecProductSku":"FAR_GAR_PGST00014","ecProductPrice":55.5,"ecProductState":"in storage","ecProductCategory":"7 & 9CV Front Wheel Drive.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":236} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 215 x 145 x 3.2. Individually. Undrilled Disc. (FAR_D021501450032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
75.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen DS 19 - 2 Sides, Linings 215 x 145 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9793,"ecProductSku":"FAR_GAR_PGST00028","ecProductPrice":75.8,"ecProductState":"in storage","ecProductCategory":"DS 19","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":237} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 7.00 x 35 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
73.10€
Incl. 20 % TAX
Oups, Rupture
No current supply on this product currently
{"ecProductName":"Citroen DS 19 - 4 Rear Jaws - Green Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9797,"ecProductSku":"FAR_GAR_PGST00030","ecProductPrice":73.1,"ecProductState":"not in storage","ecProductCategory":"DS 19.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":238} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 7.00 x 35 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:11 |
53.50€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen DS 19 - 4 Rear Jaws - Standard Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9794,"ecProductSku":"FAR_GAR_PGST00029","ecProductPrice":53.5,"ecProductState":"in storage","ecProductCategory":"DS 19.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":239} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 13.00 x 55 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX0055X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
99.40€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Citroen HY - 4 Front Jaws - Green Trim - Jaws Width 55mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9894,"ecProductSku":"FAR_GAR_PGST00103","ecProductPrice":99.4,"ecProductState":"in storage","ecProductCategory":"HY","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":240} Shipping costs from 3.99 € for France
|
|
|
