|
|
Products
- 4.00 x Hexagon head screw. Steel 8.8 (VAVIS-00026)
- 4.00 x Wide washer. White steel. (VAROND-00008)
Set of screws and washers,
Conforms to the original binding,
To attach the bench seat to the chassis of the Renault R4 4L,
For any Renault R4 4L sedan or F4 or F6 van equipped with a rear seat,
=============================
Ref. Renault Equivalent(s):
- ...
Quantity in stock:123 |
6.90€
Incl. 20 % TAX
 In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Set of screws and washers for fixing the rear seat of Renault R4 4L.","ecProductId":8610,"ecProductSku":"VA76021-78","ecProductPrice":6.9,"ecProductState":"in storage","ecProductCategory":"Fittings for the seats and door panels of Renault R4 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":871} Shipping costs from 3.99 € for France
|
|
|
|
|
Fuel gauge for 26L tank,
Attached to the tank with 3 screws.
Works on 12V,
For any Renault R4 4L sedan or F4 or F6 van equipped with this assembly,
================================
Ref. Renault Equivalent(s):
- 08 55 129 500,
- 0855129500,
- 77 00 555 753,
- 7700555753,
- 08 55 867 300,
- 0855867300,
- ...
Quantity in stock:28 |
33.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Short Fuel Gauge for Renault R4 4L, 3 Holes for Fixing Screws. For 26L tank.","ecProductId":8744,"ecProductSku":"VA61151-J","ecProductPrice":33.9,"ecProductState":"in storage","ecProductCategory":"Fuel Tanks and Gauges for 4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":872} Shipping costs from 3.99 € for France
|
|
|
|
|
Warning triangle,
To put on the ground and report a problem on the road or track,
Weight 350g,
To unfold,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,
===================
Ref. Renault Equivalent(s):
- ...
Quantity in stock:5 |
9.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Signal Traingle to Place on the Ground for Renault R4 4L or Renault Estafette.","ecProductId":9510,"ecProductSku":"VA59501-TRI","ecProductPrice":9.9,"ecProductState":"in storage","ecProductCategory":"Accessories Raid Renault R4 4L, Miscellaneous.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":873} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Hexagon head screw. Steel 8.8. Partial thread. (VAVIS-00028)
- 1.00 x Fan washer. (VAROND-00009)
- 1.00 x Standard nut. Bichromated steel. (VAECR-00005)
Bolt for fixing the silent block which is fixed to the nose of the gearbox and the front cross member.
Individually,
Strictly compliant.
For any Renault R4 4L sedan or F4 or F6 van.
=============================
Ref. Renault Equivalent(s):
Screw:
- 77 03 001 170,
- 7703001170,
Washer:
- 77 03 056 085,
- 7703056085,
Nut:
- 79 03 032 018,
- 7903032018,
Quantity in stock:70 |
0.66€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Silent Block Mounting Bolt, Gearbox Mount for Renault R4 4L.","ecProductId":8649,"ecProductSku":"VA19801-20B2","ecProductPrice":0.66,"ecProductState":"in storage","ecProductCategory":"Silent Block or Gearbox Support for 4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":874} Shipping costs from 3.99 € for France
|
|
|
|
|
Clevis mounting rubber, between tie rod and steering rack,
By unit,
Left or right mount,
You need 2 for a car.
Inner tube length : 27,
Tube length ext : 20,
Outside diameter : 28,
Inner diameter : 10.
For any Renault R4 4L sedan or F4 van manufactured between 1968 and 1978, with link rod rack.
================================
Ref. Renault Equivalent (s):
- 77 00 509 247,
- 7700509247,
Quantity in stock:24 |
3.90€
Incl. 20 % TAX
 Back
This product is in the process of being procured and should be re-shipped from 30.09.2025
{"ecProductName":"Silent block of clevis, between tie rod and steering rack for Renault R4 4L from 1968 until 1978.","ecProductId":1133,"ecProductSku":"VA36301-18SB","ecProductPrice":3.9,"ecProductState":"not in storage","ecProductCategory":"Tie Rod Ends and Tie Rods for Renault R4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":875} Shipping costs from 3.99 € for France
|
|
|
|
|
Please note that this performance part will reduce the comfort of your car, by absorbing less engine/gearbox vibrations! Avoid if you don't know what to expect!
Right side.
SHORE 80
Good quality rubber.
Conforming product.
For Billancourt engine, 782, 845cc,
Engine Type 800 & 839
Engine recognizable by the cooling fan with belt drive, which is attached to the water pump.
For any Renault R4 4L sedan or F4 or F6 van equipped with a Billancourt engine,
===============================
Ref Renault equivalent (s):
- 08 23 973 200,
- 0823973200,
Quantity in stock:530 |
19.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Silent block, engine support for Renault R4 4L with Billancourt engine. Right side. Shore 80.","ecProductId":8473,"ecProductSku":"VA19801-15D80","ecProductPrice":19.9,"ecProductState":"in storage","ecProductCategory":"Silent Block and Engine Mounts for 4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":876} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 7.00 x 25 x 3.7 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX0025X3.7VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
98.79€
Incl. 20 % TAX
 Oups, Rupture
No current supply on this product currently
{"ecProductName":"Simca 5 CV - 4 Front or Rear Shoes - Green Trim - Shoes Width 25mm, New Trim Thickness 3.7mm. Upholstery Service on your Old Parts.","ecProductId":10012,"ecProductSku":"FAR_GAR_PGST00118","ecProductPrice":98.79,"ecProductState":"not in storage","ecProductCategory":"5 CV Simca 5","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":877} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 7.00 x 25 x 3.7 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00025x3.7STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:14 |
59.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 5 CV - 4 Front or Rear Shoes - Standard Trim - Shoes Width 25mm, New Trim Thickness 3.7mm. Upholstery Service on your Old Parts.","ecProductId":10008,"ecProductSku":"FAR_GAR_PGST00115","ecProductPrice":59.8,"ecProductState":"in storage","ecProductCategory":"5 CV Simca 5","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":878} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 155 x 114 x 3.6. Individually. Undrilled Disc. (FAR_D015501140036STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:5 |
87.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 5 CV et 6 CV - 2 Sides, Linings 155 x 114 x 3.6 - Standard Quality - Clutch Disc Lining Service.","ecProductId":10003,"ecProductSku":"FAR_GAR_PGST00113","ecProductPrice":87.8,"ecProductState":"in storage","ecProductCategory":"5 CV Simca 5","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":879} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 155 x 114 x 4. Individually. Undrilled Disc. (FAR_D015501140040STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:4 |
85.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 5 CV et 6 CV - 2 Sides, Linings 155 x 114 x 4 - Standard Quality - Clutch Disc Lining Service.","ecProductId":10004,"ecProductSku":"FAR_GAR_PGST00114","ecProductPrice":85.8,"ecProductState":"in storage","ecProductCategory":"5 CV Simca 5","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":880} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 9.00 x 30 x 4 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X4VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:7 |
69.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 6 CV - 4 Front or Rear Shoes - Green Trim - Shoes Width 30mm, New Trim Thickness 4mm. Upholstery Service on your Old Parts.","ecProductId":10010,"ecProductSku":"FAR_GAR_PGST00117","ecProductPrice":69.8,"ecProductState":"in storage","ecProductCategory":"6 CV Simca 6","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":881} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 9.00 x 30 x 4 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030x4STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:8 |
62.60€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 6 CV - 4 Front or Rear Shoes - Standard Trim - Shoes Width 30mm, New Trim Thickness 4mm. Upholstery Service on your Old Parts.","ecProductId":10009,"ecProductSku":"FAR_GAR_PGST00116","ecProductPrice":62.6,"ecProductState":"in storage","ecProductCategory":"6 CV Simca 6","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":882} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 40 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00040x5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:4 |
79.70€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 8, 1200 & 1200 Sport - 4 Front or Rear Shoes - Green Quality - Shoes Width 40mm, New Trim Thickness 5mm. Trimming Service on your Old Parts.","ecProductId":9998,"ecProductSku":"FAR_GAR_PGST00110","ecProductPrice":79.7,"ecProductState":"in storage","ecProductCategory":"7 CV Simca 8","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":883} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 40 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00040X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:4 |
59.13€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 8, 1200 & 1200 Sport - 4 Front or Rear Shoes - Standard Trim - Shoes Width 40mm, New Trim Thickness 5mm. Trimming Service on your Old Parts.","ecProductId":9997,"ecProductSku":"FAR_GAR_PGST00109","ecProductPrice":59.13,"ecProductState":"in storage","ecProductCategory":"7 CV Simca 8","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":884} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 187.5 x 130 x 3.2. Individually. Undrilled Disc. (FAR_D018751300032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca 8, 1200 and 1200 Sport - 2 Sides, Linings 187.5 x 130 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":10001,"ecProductSku":"FAR_GAR_PGST00111","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"7 CV Simca 8","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":885} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 181.5 x 124 x 3.2. Individually. Undrilled Disc. (FAR_D018151240032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:8 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane - 2 Sides, Linings 181.5 x 124 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9817,"ecProductSku":"FAR_GAR_PGST00044","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":886} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Kevlar Clutch Disc Lining 215 x 145 x 3.2 mm. Individually. Undrilled Disc. (FAR_D021501450032KEV)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:5 |
155.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 2 Sides, Linings 215 x 145 x 3.2 - Kevlar Quality - Clutch Disc Lining Service.","ecProductId":9819,"ecProductSku":"FAR_GAR_PGST00046","ecProductPrice":155.8,"ecProductState":"in storage","ecProductCategory":"Vedette","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":887} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 215 x 145 x 3.2. Individually. Undrilled Disc. (FAR_D021501450032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
75.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 2 Sides, Linings 215 x 145 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9818,"ecProductSku":"FAR_GAR_PGST00045","ecProductPrice":75.8,"ecProductState":"in storage","ecProductCategory":"Vedette","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":888} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 65 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX0065X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:7 |
77.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Front Jaws - Green Trim - Jaws Width 63mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9824,"ecProductSku":"FAR_GAR_PGST00051","ecProductPrice":77,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":889} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 65 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00065X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:8 |
63.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Front Jaws - Standard Trim - Jaws Width 63mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9822,"ecProductSku":"FAR_GAR_PGST00049","ecProductPrice":63,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":890} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 45 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:1 |
85.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Green Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9825,"ecProductSku":"FAR_GAR_PGST00052","ecProductPrice":85,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":891} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 50 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
75.30€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Green Trim - Jaws Width 50mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9828,"ecProductSku":"FAR_GAR_PGST00054","ecProductPrice":75.3,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":892} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 45 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
59.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Standard Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9823,"ecProductSku":"FAR_GAR_PGST00050","ecProductPrice":59.8,"ecProductState":"in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":893} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 50 x 5 - Standard Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Notify availabilityQuantity in stock:0 |
61.99€
Incl. 20 % TAX
Oups, Rupture
No current supply on this product currently
{"ecProductName":"Simca Ariane, Vedette - 4 Rear Jaws - Standard Trim - Jaws Width 50mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9826,"ecProductSku":"FAR_GAR_PGST00053","ecProductPrice":61.99,"ecProductState":"not in storage","ecProductCategory":"Ariane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":894} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 181.5 x 124 x 3.2. Individually. Undrilled Disc. (FAR_D018151240032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:8 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 2 Sides, Linings 181.5 x 124 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9791,"ecProductSku":"FAR_GAR_PGST00026","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Aronde.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":895} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 187.5 x 130 x 3.2. Individually. Undrilled Disc. (FAR_D018751300032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 2 Sides, Linings 187.5 x 130 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9792,"ecProductSku":"FAR_GAR_PGST00027","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Aronde.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":896} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 45 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:1 |
88.50€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 4 Front or Rear Jaws - Green Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9821,"ecProductSku":"FAR_GAR_PGST00048","ecProductPrice":88.5,"ecProductState":"in storage","ecProductCategory":"Aronde","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":897} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 11.00 x 45 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00045X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
60.78€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Simca Aronde - 4 Front or Rear Jaws - Standard Trim - Jaws Width 45mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9820,"ecProductSku":"FAR_GAR_PGST00047","ecProductPrice":60.78,"ecProductState":"in storage","ecProductCategory":"Aronde","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":898} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Base seal. Carburetor 32, center distance 65mm. (VA1580-EMBG)
Base gasket.
Fits any Renault R4 4L sedan or F4 or F6 van equipped with this carburetor.
================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:387 |
1.80€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Single Base Gasket for Renault R4 4L Zenith 32 IF 7 Carburetor.","ecProductId":7690,"ecProductSku":"VA12101-32IF72","ecProductPrice":1.8,"ecProductState":"in storage","ecProductCategory":"Complete and new Carburettors, 28IF and 32IF7 for 4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":899} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Base gasket. 32mm carburetor, 65mm center distance. Reinforced/armored model. (VA1580-EMB2)
Base gasket.
Armed/Reinforced Model,
Fits any Renault R4 4L sedan or F4 or F6 van equipped with this carburetor.
================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:998 |
3.30€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 28.07.2025
{"ecProductName":"Single Base Gasket for Zenith 32 IF 7 Carburetor of Renault R4 4L. Reinforced\/Armored Model.","ecProductId":10153,"ecProductSku":"VA12101-32IF73","ecProductPrice":3.3,"ecProductState":"in storage","ecProductCategory":"Complete and new Carburettors, 28IF and 32IF7 for 4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":900} Shipping costs from 3.99 € for France
|
|
|
