|
|
Left side.
Compliant with the origin.
Quality piece.
Rectangular shape.
For all Renault R4 4L sedan or F4 or F6 van with this assembly.
================================
Ref Renault Equivalent (s):
- 77 01 024 136,
- 7701024136,
Quantity in stock:114 |
8.90€
Incl. 20 % TAX
 Back
This product is in the process of being procured and should be re-shipped from 30.09.2025
{"ecProductName":"Rectangular flashing lens for Renault R4 4L. Bicolor. Left side.","ecProductId":509,"ecProductSku":"VA80401-3","ecProductPrice":8.9,"ecProductState":"not in storage","ecProductCategory":"Two-tone rectangular indicators for Renault R4 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":751} Shipping costs from 3.99 € for France
|
|
|
|
|
Right side.
Compliant with the origin.
Quality piece.
Rectangular shape.
For all Renault R4 4L sedan or F4 or F6 van with this assembly.
================================
Ref Renault Equivalent (s):
- 77 01 024 138,
- 7701024138,
Quantity in stock:112 |
8.90€
Incl. 20 % TAX
Back
This product is in the process of being procured and should be re-shipped from 30.09.2025
{"ecProductName":"Rectangular flashing lens for Renault R4 4L. Bicolor. Right side.","ecProductId":510,"ecProductSku":"VA80401-6","ecProductPrice":8.9,"ecProductState":"not in storage","ecProductCategory":"Two-tone rectangular indicators for Renault R4 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":752} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 3.30 x Sheet metal edge seal, roof tower ring, red (Linear meter) (FAR_9_0003)
Red roof tower bead,
Molding,
Clips onto the sheet metal return all around the roof,
For any Renault Estafette pick up,
===============================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:133 |
9.57€
Incl. 20 % TAX
 In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Red roof-top tent, Estafette Pick-up","ecProductId":1463,"ecProductSku":"VA9994-47PUR","ecProductPrice":9.57,"ecProductState":"in storage","ecProductCategory":"Roof liner","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":753} Shipping costs from 3.99 € for France
|
|
|
|
|
Socket for stabilizer bar silent block,
By unit,
In bronze, to be stronger and to resist, particularly during raids, the attack of the torsion bars which come out of their housing,
For long metal tube.
For all Renault R4 4L sedan or F4 or F6 van with this assembly.
==============================
Ref. Renault Equivalent(s):
- 77 05 002 001,
- 7705002001,
Quantity in stock:179 |
9.90€
12.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Reinforced Bronze Bushing for Stabilizer Bar Silent Block for Renault R4 4L. For Silent Block with Long Metal Insert. By Unit.","ecProductId":9748,"ecProductSku":"VA32101-3","ecProductPrice":12.9,"ecProductState":"in storage","ecProductCategory":"Silent Blocks for 4L Stabilizer Bar.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":754} Shipping costs from 3.99 € for France
|
|
|
|
|
Left side.
Suspension arm equipped:
- Upper ball joint,
- 2 silent blocks.
Black protective paint.
Reinforced.
Ready to go.
Riveted ball joint.
For all models of Renault R4 4L sedan or F4 or F6 van equipped with this arm.
=============================
Ref. Renault Equivalent (s):
- 08 32 139 900.
- 0832139900,
Quantity in stock:30 |
44.90€
Incl. 20 % TAX
Back
This product is in the process of being procured and should be re-shipped from 30.09.2025
{"ecProductName":"Reinforced upper suspension arm for Renault R4 4L. Left side.","ecProductId":585,"ecProductSku":"VA31011-12","ecProductPrice":44.9,"ecProductState":"not in storage","ecProductCategory":"Upper Suspension Arms complete for Renault R4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":755} Shipping costs from 3.99 € for France
|
|
|
|
|
Right side.
Suspension arm equipped:
- Upper ball joint,
- 2 silent blocks.
Black protective paint.
Reinforced.
Ready to go.
Riveted ball joint.
For all models of Renault R4 4L sedan or F4 or F6 van equipped with this arm.
=============================
Ref. Renault Equivalent (s):
- 08 32 140 000.
- 0832140000.
Quantity in stock:77 |
44.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Reinforced upper suspension arm for Renault R4 4L. Right side.","ecProductId":584,"ecProductSku":"VA31011-122","ecProductPrice":44.9,"ecProductState":"in storage","ecProductCategory":"Upper Suspension Arms complete for Renault R4L","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":756} Shipping costs from 3.99 € for France
|
|
|
|
|
Cross member,
Under the engine,
For any Renault R4 4L sedan or F4 or F6 van,
==============================
Ref. Renault Equivalent (s):
- 77 00 652 820,
- 7700652800,
Quantity in stock:49 |
14.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Removable Cross Member for Renault R4 4L.","ecProductId":7455,"ecProductSku":"VA41101-14","ecProductPrice":14.9,"ecProductState":"in storage","ecProductCategory":"Removable lower cross member. 4L.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":757} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 160 x 110 x 3.2. Individually. Undrilled Disc. (FAR_D016001100032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:5 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault 4CV - 2 Sides, Linings 160 x 110 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9779,"ecProductSku":"FAR_GAR_PGST00017","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Renault - Clutch Disc Filling Service","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":758} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 8.00 x 50 x 4.8 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X4.8VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:12 |
67.60€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault 4CV - 4 Front or Rear Jaws - Green Quality - Jaws Width 32mm, New Trim Thickness 4.8mm. Upholstery service on your Old Parts.","ecProductId":9783,"ecProductSku":"FAR_GAR_PGST00021","ecProductPrice":67.6,"ecProductState":"in storage","ecProductCategory":"4CV","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":759} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 8.00 x 37 x 4.8 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00037X4.8STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:12 |
55.76€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault 4CV - 4 Front or Rear Jaws - Standard Quality - Jaws Width 32mm, New Trim Thickness 4.8mm. Upholstery service on your Old Parts.","ecProductId":9780,"ecProductSku":"FAR_GAR_PGST00018","ecProductPrice":55.76,"ecProductState":"in storage","ecProductCategory":"4CV","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":760} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 215 x 145 x 3.2. Individually. Undrilled Disc. (FAR_D021501450032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:24 |
75.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Amiral, Caravelle, Fregate, Transfluide - 2 Sides, Linings 215 x 145 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9856,"ecProductSku":"FAR_GAR_PGST00074","ecProductPrice":75.8,"ecProductState":"in storage","ecProductCategory":"Amiral","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":761} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 235 x 165 x 3.2. Individually. Undrilled Disc. (FAR_D023501650032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:3 |
75.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault B80, B90, B110, Midliner - 2 Sides, Linings 235 x 165 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9787,"ecProductSku":"FAR_GAR_PGST00025","ecProductPrice":75.8,"ecProductState":"in storage","ecProductCategory":"B80, B90, B110","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":762} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 160 x 110 x 3. Individually. Undrilled Disc. (FAR_D016001100030STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:2 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Dauphine - 2 Sides, Linings 160 x 110 x 3 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9812,"ecProductSku":"FAR_GAR_PGST00039","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Dauphine","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":763} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 9.00 x 30 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00030X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:16 |
56.21€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Dauphine - 4 Front or Rear Jaws - Standard Quality - Jaws Width 30mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9813,"ecProductSku":"FAR_GAR_PGST00040","ecProductPrice":56.21,"ecProductState":"in storage","ecProductCategory":"Dauphine","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":764} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 181.5 x 124 x 3.2. Individually. Undrilled Disc. (FAR_D018151240032STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:8 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Dauphinoise - 2 Sides, Linings 181.5 x 124 x 3.2 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9855,"ecProductSku":"FAR_GAR_PGST00073","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"Dauphinoise","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":765} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 35 x 5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:5 |
83.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Dauphinoise - 4 Front or Rear Jaws - Green Trim - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9854,"ecProductSku":"FAR_GAR_PGST00072","ecProductPrice":83,"ecProductState":"in storage","ecProductCategory":"Dauphinoise","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":766} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 35 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
55.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Dauphinoise - 4 Front or Rear Jaws - Standard Trim - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9853,"ecProductSku":"FAR_GAR_PGST00071","ecProductPrice":55,"ecProductState":"in storage","ecProductCategory":"Dauphinoise","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":767} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 50 x 6 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X6VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
73.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Juvaquatre 1938-39 - 4 Front or Rear Jaws - Green Quality - Jaws Width 35mm, New Trim Thickness 6mm. Upholstery service on your Old Parts.","ecProductId":9784,"ecProductSku":"FAR_GAR_PGST00022","ecProductPrice":73,"ecProductState":"in storage","ecProductCategory":"Juvaquatre","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":768} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 40 x 6 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00040x6STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:5 |
55.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Juvaquatre 1938-39 - 4 Front or Rear Jaws - Standard Quality - Jaws Width 35mm, New Trim Thickness 6mm. Upholstery service on your Old Parts.","ecProductId":9781,"ecProductSku":"FAR_GAR_PGST00019","ecProductPrice":55,"ecProductState":"in storage","ecProductCategory":"Juvaquatre","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":769} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 38 x 5 - Tender “Green” Topping to the Cup. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00038X5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:6 |
77.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Juvaquatre 1945-49 - 4 Front or Rear Jaws - Green Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9785,"ecProductSku":"FAR_GAR_PGST00023","ecProductPrice":77,"ecProductState":"in storage","ecProductCategory":"Juvaquatre","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":770} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 10.00 x 35 x 5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00035X5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
55.00€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault Juvaquatre 1945-49 - 4 Front or Rear Jaws - Standard Quality - Jaws Width 35mm, New Trim Thickness 5mm. Upholstery service on your Old Parts.","ecProductId":9782,"ecProductSku":"FAR_GAR_PGST00020","ecProductPrice":55,"ecProductState":"in storage","ecProductCategory":"Juvaquatre","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":771} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 225 x 146 x 3.5. Individually. Undrilled Disc. (FAR_D022501460035STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:18 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault R2069, R2087, Colorale - 2 Sides, Linings 225 x 146 x 3.5 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9811,"ecProductSku":"FAR_GAR_PGST00038","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"R2069, R2087.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":772} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 2.00 x Standard Clutch Disc Lining 276 x 165 x 3.5. Individually. Undrilled Disc. (FAR_D027602650035STD)
- 1.00 x Clutch Disc Filling Service (2 Sides). Degreased and in Working Order. (FAR_GARN_PRG)
Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,
Quantity in stock:1 |
73.80€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault R2069, R2087, Colorale - 2 Sides, Linings 276 x 165 x 3.5 - Standard Quality - Clutch Disc Lining Service.","ecProductId":9810,"ecProductSku":"FAR_GAR_PGST00037","ecProductPrice":73.8,"ecProductState":"in storage","ecProductCategory":"R2069, R2087.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":773} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 15.00 x 50 x 6.5 - Green Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X6.5VRT)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:3 |
108.50€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault R2069, R2087, Colorale - 4 Front or Rear Jaws - Green Quality - Jaws Width 50mm, New Trim Thickness 6.5mm. Upholstery service on your Old Parts.","ecProductId":9809,"ecProductSku":"FAR_GAR_PGST00036","ecProductPrice":108.5,"ecProductState":"in storage","ecProductCategory":"R2069, R2087.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":774} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 15.00 x 50 x 6.5 - Standard Cup Trim. Multiple of 10cm. Neither Returned nor Exchanged. (FAR-RLX00050X6.5STD)
- 1.00 x 4 Brake or Clutch Shoe Lining Service; Dismantling of Old Linings, Shot Blasting of Jaws (Except Alu), Painting of Jaws (Except Alu), Bonding with Baking, Grinding and Decalibration of New Segments. (FAR_GARN_004X)
Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,
Quantity in stock:8 |
69.65€
Incl. 20 % TAX
In stock
This product is a service on your part or an exchange repair. Once the work is done on your old part, it will be shipped. The elements necessary to carry out the work are in stock.
{"ecProductName":"Renault R2069, R2087, Colorale - 4 Front or Rear Jaws - Standard Quality - Jaws Width 50mm, New Trim Thickness 6.5mm. Upholstery service on your Old Parts.","ecProductId":9808,"ecProductSku":"FAR_GAR_PGST00035","ecProductPrice":69.65,"ecProductState":"in storage","ecProductCategory":"R2069, R2087.","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":775} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Clamp for exhaust manifold for Renault Estafette or Renault R4 4L. (VA1525-10)
- 1.00 x Exhaust Clamp for Renault R4 4L. Diameter 43 mm. (VA1950-2b)
- 2.00 x Exhaust Clamp for Renault R4 4L. Diameter 35 mm. (VA1950-4b)
- 2.00 x Exhaust tube silent block for Renault R4 4L. V2.0. Soft for greater comfort. (VA1950-7B)
Kit of clamps and mounting rubbers,
For mounting the exhaust,
Quality parts,
For any Renault R4 4L sedan or F4 van,
R4 4L sedans :
- R1120: all models,
- R1121: all models,
- R1122: all models,
- R1123: all models,
- R1124: all models,
- R1126: all models,
R4 4L F4 Vans :
- R2102: all models,
- R2104: all models,
- R2105: all models,
- R2106: all models,
- R2109: all models,
- R2391: all models,
- R2392: all models,
=================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:16 |
21.40€
19.26€
Save 10% Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Renault R4 4L exhaust mounting kit ; clamps + mounting rubbers.","ecProductId":1382,"ecProductSku":"VA1950-BK3","ecProductPrice":19.26,"ecProductState":"in storage","ecProductCategory":"Type R1120","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":776} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Clamp for exhaust manifold for Renault Estafette or Renault R4 4L. (VA1525-10)
- 1.00 x Exhaust Clamp for Renault R4 4L. Diameter 43 mm. (VA1950-2b)
- 1.00 x Mounting rubber for muffler for Renault R4 4L GTL, Savane or Clan. (VA19521-13)
- 2.00 x Exhaust Clamp for Renault R4 4L. Diameter 35 mm. (VA1950-4b)
- 2.00 x Exhaust tube silent block for Renault R4 4L. V2.0. Soft for greater comfort. (VA1950-7B)
Kit of clamps and mounting rubbers,
For mounting the exhaust,
Quality parts,
For any Renault R4 4L sedan GTL CLAN,
R4 4L sedan :
- R1128 : from 09.1983 to end,
- 112C00 : all models,
=================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:16 |
24.30€
21.87€
Save 10% Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Renault R4 4L GTL CLAN & SAVANE exhaust mounting kit ; clamps + mounting rubbers.","ecProductId":1381,"ecProductSku":"VA1950-BK2","ecProductPrice":21.87,"ecProductState":"in storage","ecProductCategory":"Type 112C00 - Savane","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":777} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Clamp for exhaust manifold for Renault Estafette or Renault R4 4L. (VA1525-10)
- 1.00 x Exhaust Clamp for Renault R4 4L. Diameter 43 mm. (VA1950-2b)
- 2.00 x Exhaust Clamp for Renault R4 4L. Diameter 35 mm. (VA1950-4b)
- 1.00 x Mounting rubber for muffler for Renault R4 4L GTL, Savane or Clan. (VA19521-13)
- 5.00 x Exhaust tube silent block for Renault R4 4L. V2.0. Soft for greater comfort. (VA1950-7B)
Kit of clamps and mounting rubbers,
For mounting the exhaust,
Quality parts,
For any Renault R4 4L sedan GTL CLAN,
R4 4L sedan :
- R1128: since 10.1979 to 08.1983,
=================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:16 |
30.00€
27.00€
Save 10% Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Renault R4 4L GTL CLAN exhaust mounting kit ; clamps + mounting rubbers.","ecProductId":1354,"ecProductSku":"VA1950-AK","ecProductPrice":27,"ecProductState":"in storage","ecProductCategory":"Type R1128 - GTL - 10.1979 -> 08.1983","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":778} Shipping costs from 3.99 € for France
|
|
|
|
|
Products
- 1.00 x Clamp for exhaust manifold for Renault Estafette or Renault R4 4L. (VA1525-10)
- 1.00 x Exhaust Clamp for Renault R4 4L. Diameter 43 mm. (VA1950-2b)
- 1.00 x Exhaust Clamp for Renault R4 4L. Diameter 38 mm. (VA1950-2c)
- 1.00 x Exhaust Clamp for Renault R4 4L. Diameter 35 mm. (VA1950-4b)
- 4.00 x Exhaust tube silent block for Renault R4 4L. V2.0. Soft for greater comfort. (VA1950-7B)
Kit of clamps and mounting rubbers,
For mounting the exhaust,
Quality parts,
For any Renault R4 4L sedan GTL CLAN,
R4 4L sedan :
- R1128: from start to 09.1979,
=================================
Ref. Renault Equivalent (s):
- ...
Quantity in stock:18 |
24.20€
21.78€
Save 10% Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Renault R4 4L GTL CLAN exhaust mounting kit ; clamps + mounting rubbers.","ecProductId":1355,"ecProductSku":"VA1950-BK1","ecProductPrice":21.78,"ecProductState":"in storage","ecProductCategory":"Type R210B00","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":779} Shipping costs from 3.99 € for France
|
|
|
|
|
Windscreen seal,
Keyless assembly,
For Renault R4 4L sedan or F4 van only,
Not suitable for a Renault 4L F6,
Pose with a string,
For any Renault R4 4L sedan or F4 van with this mount,
===============================
Ref. Renault Equivalents:
- 77 00 656 274.
- 7700656274.
Quantity in stock:69 |
44.90€
Incl. 20 % TAX
In stock
The packages of the day are gone! This product will be shipped 22.08.2025
{"ecProductName":"Renault R4 4L windscreen seal, keyless assembly, 4L Sedan or F4 van.","ecProductId":737,"ecProductSku":"VA66011-1","ecProductPrice":44.9,"ecProductState":"in storage","ecProductCategory":"Windscreen","ecProductRating":0,"event":"productClic","ecProductList":"Manufacturer","ecProductPosition":780} Shipping costs from 3.99 € for France
|
|
|
