Pack of 10 waterproof sleeves,
Crimp,
Wire section 1.5 to 2.5 mm2,
Thermoretractable,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,

==============================
Ref. Renault Equivalent (s):
- ...

Your pulley looks like the one on the picture? (Presented without its support).

Bearing to change when the tensioner pulley of the water pump belt starts to get loose.
Bearing only, pulley not included in the kit, only presented to avoid mistakes in the choice of bearing.
Suitable for all models of Renault Estafette, Renault 4, R4, 4L equipped with this pulley.

============================
Ref. Renault Equivalent (s):
- ...

Bellows designed to be fitted with steering rod racks.
Set of 2,
Delivered with their fixing collar
For any Renault R4 4L sedan or F4 van manufactured between 1968 and 1978,

============================
Ref. Renault Equivalent(s):
- ...

softer and thinner than the original version VA36101-22,
Left or right mounting.
Sold by pair with necklace.
Smallest hole: 13 mm,
Largest hole (excluding outside diameter of bellows): 34 mm,
Length: 165mm,
For steering rack.
Adaptable universal bellows.
Suitable for all Renault R4 4L sedan or F4 or F6 van from 1979.

=================================
Ref. Renault Equivalent(s):
- 77 00 656 569,
- 7700656569,

Lot of 25 wire ties,
Diameter of passage 15 mm.
Plastic,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,

=============================
Ref. Renault Equivalent (s):
- ...

Lot of 25 wire ties,
Diameter of passage 19 mm.
Plastic,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,

=============================
Ref. Renault Equivalent (s):
- ...

Jack crank retaining clips,
Lot of 3 pieces.
Plastic,
White color,
For jack crank attached to the wing flange,
For any Renault R4 4L sedan or F4 or F6 van,

=============================
Ref. Renault Equivalent (s):
- ...

Pedal cover 100% in accordance with the origin,
Very good quality,
VADEV re-fabrication,
Rubber,
Black color,
For any Renault R4 4L sedan or F4 or F6 van, for clutch and brake pedal from 1972 until end of production,

==============================
Ref. Renault Equivalent (s):
- ...

Pedal cover 100% in accordance with the origin,
Very good quality,
VADEV re-fabrication,
Rubber,
Black color,
For any Renault R3 R4 4L sedan or F4 van, for clutch and brake pedal until 1972,

==============================
Ref. Renault Equivalent (s):
- ...

Set of 4 rubber bonnet stops,
For 4L front bonnet,
Supplied with fixation,
Compliant originally,
Black color,
Rubber,
For any Renault R4 4L sedan or F4 or F6 van,

===================================
Ref. Renault Equivalent (s):
- 06 07 121 100,
- 0607121100,

Pack of 50 waterproof sleeves,
Crimp,
Wire section 1.5 to 2.5 mm2,
Thermoretractable,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,

==============================
Ref. Renault Equivalent (s):
- ...

Set of battery lug,
2 parts,
Positive and negative,
Pro quality,
For car battery,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,

===========================
Ref. Renault Equivalent (s):
- ...

Bumper fitting screws + nuts kit,
For front and rear bumpers,
With nuts,
For any Renault R4 4L sedan or F4 or F6 van,

==============================
Ref. Renault Equivalent (s):
- ...

Nuts + washers for fixing the terminals on the threaded terminals of the coils,
Complete set,
For all Renault R4 4L sedan or F4 or F6 vans,
For all Renault Estafette,

========================
Ref. Renault equivalent(s):
- 79 03 032 006,
- 7903032006,
- 79 03 056 005,
- 7903056005,

Pair of rubber seal for taillight lens,
Left or right side.
For any Renault R4 4L sedan,

==============================
Ref. Renault Equivalente(s) :
Rear left lens rubber seal :
- 77 01 004 610,
- 7701004610,
- 08 54 733 600,
- 0854733600,
Rear right lens rubber seal :
- 08 70 334 000,
- 0870334000,
- 08 54 733 600,
- 0854733600,

Set of screws and washers,
Conforms to the original binding,
To attach the bench seat to the chassis of the Renault R4 4L,
For any Renault R4 4L sedan or F4 or F6 van equipped with a rear seat,

=============================
Ref. Renault Equivalent(s):
- ...

Fuel gauge for 26L tank,
Attached to the tank with 3 screws.
Works on 12V,
For any Renault R4 4L sedan or F4 or F6 van equipped with this assembly,

================================
Ref. Renault Equivalent(s):
- 08 55 129 500,
- 0855129500,
- 77 00 555 753,
- 7700555753,
- 08 55 867 300,
- 0855867300,
- ...

Warning triangle,
To put on the ground and report a problem on the road or track,
Weight 350g,
To unfold,
For any Renault R4 4L sedan or F4 or F6 van,
For any Renault Estafette,

===================
Ref. Renault Equivalent(s):
- ...

Bolt for fixing the silent block which is fixed to the nose of the gearbox and the front cross member.
Individually,
Strictly compliant.
For any Renault R4 4L sedan or F4 or F6 van.

=============================
Ref. Renault Equivalent(s):
Screw:
- 77 03 001 170,
- 7703001170,
Washer:
- 77 03 056 085,
- 7703056085,
Nut:
- 79 03 032 018,
- 7903032018,

Clevis mounting rubber, between tie rod and steering rack,
By unit,
Left or right mount,
You need 2 for a car.
Inner tube length : 27,
Tube length ext : 20,
Outside diameter : 28,
Inner diameter : 10.
For any Renault R4 4L sedan or F4 van manufactured between 1968 and 1978, with link rod rack.

================================
Ref. Renault Equivalent (s):
- 77 00 509 247,
- 7700509247,

Please note that this performance part will reduce the comfort of your car, by absorbing less engine/gearbox vibrations! Avoid if you don't know what to expect!
Right side.
SHORE 80
Good quality rubber.
Conforming product.
For Billancourt engine, 782, 845cc,
Engine Type 800 & 839
Engine recognizable by the cooling fan with belt drive, which is attached to the water pump.
For any Renault R4 4L sedan or F4 or F6 van equipped with a Billancourt engine,

===============================
Ref Renault equivalent (s):
- 08 23 973 200,
- 0823973200,

Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,

Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,

Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,

Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,

Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,

Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,

Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,

Non-contractual photo,
Installation of new segments by industrial bonding including a cooking cycle,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE OLD CUSTOMER-SUPPLIED JAWS,

Non-contractual photo,
Installation of new clutch washers by riveting,
The filling service includes the supply and installation of friction washers or segments. The customer can choose a shipping cost that corresponds to the return of the part. Sending old parts to our depot is their responsibility.
The customer must send old parts to our address only, no collection point.
DO NOT INCLUDE THE CORE OF THE CLUTCH DISC, SUPPLIED BY THE CUSTOMER,